Vent-A-Hood 42-Inch 1035 CFM M Series Outdoor Vent Hood - Stainless Steel
Vent-A-Hood 42-Inch M-Series 1035 CFM 304 Stainless Steel Baffle Style Wall Mount Range Hood
|
Since 1933, Vent-A-Hood has been the gold standard in residential ventilation, trusted by homeowners who refuse to compromise on air quality or craftsmanship. The M-Series pairs a clean linear design with the powerful M1200 blower motor, delivering 1,035 CFM of airflow through industrial-grade stainless steel baffle filters with four-speed precision control. At 42 inches wide with an extended 30-inch deep canopy, this hood provides the ideal combination of width and depth for 36-inch professional ranges, outdoor grills, and high-BTU cooktops — reaching three inches further over the front burners than a standard 27-inch canopy to capture more grease and smoke before it escapes. |
Performance & Power
✓ 1,035 CFM M1200 Blower
✓ 6.6 Sones at High Speed
✓ 4-Speed Variable Control
✓ VP566 Transition Included
Filtration & Safety
✓ Industrial-Grade Baffle Filters
✓ Dishwasher-Safe Baffles
✓ Grease & Smoke Containment
✓ LED Lighting with Dimming
American Craftsmanship
✓ 304-Grade Stainless Steel Body
✓ Extended 30-Inch Deep Canopy
✓ Outdoor Rated (Covered Patio)
✓ Proudly Made in the USA
Key Features & Owner Benefits:
- Powerful M1200 Blower Motor: The M1200 internal blower delivers a full 1,035 CFM of airflow at just 6.6 Sones, providing the power needed to clear heavy smoke, grease, and cooking odors from professional-style ranges, outdoor grills, and high-BTU cooktops.
- Extended 30-Inch Capture Depth: Three inches deeper than a standard 27-inch canopy, the 30-inch active depth provides a significantly larger capture zone directly over the cooking surface, containing more grease and smoke before it can escape into covered patio areas or open kitchens.
- Industrial-Grade Stainless Steel Baffle Filters: Professional-grade stainless steel baffles intercept airborne grease before it can enter the ductwork, protecting your ventilation system and reducing the risk of grease-related fire hazards over time. Baffles are removable and dishwasher-safe for easy maintenance.
- 4-Speed Blower Control: Four distinct fan speed settings give you precise airflow control — from a gentle background setting for light cooking to full 1,035 CFM power for high-heat grilling and searing.
- 304-Grade Stainless Steel Construction: Heavy-gauge 304-grade stainless steel resists corrosion, UV exposure, and temperature extremes, ensuring the hood maintains structural integrity and appearance in both indoor and outdoor environments.
- Outdoor Rated for Covered Patios: Built to withstand the elements in covered outdoor kitchens when installed with a GFCI-protected circuit — no separate outdoor model required.
- VP566 Transition & 10-Inch Round Ducting: The included VP566 transition adapter connects the M1200 blower directly to 10-inch round ducting for straightforward installation with no additional adapters or modifications required.
- Variable LED Lighting with 2-Level Dimming: Three GU10 LED bulbs illuminate the full cooking surface, providing bright task lighting for active cooking and a dimmed setting for low-light grilling sessions.
Extended-Depth M-Series Power for Professional Cooktops and Outdoor Grills
The Vent-A-Hood 42-Inch M-Series Hood with 30-inch depth is built for homeowners and outdoor cooks who need more front-to-back capture than a standard 27-inch canopy can provide. Whether installed over a 36-inch professional range, a built-in outdoor grill, or a high-BTU gas cooktop, the extended 30-inch depth reaches three inches further over the front burners where smoke and grease escape most readily during high-heat cooking. Since 1933, Vent-A-Hood has focused exclusively on ventilation engineering — a single-category expertise that has produced innovations no full-line appliance manufacturer has replicated.
The M1200 blower motor is the workhorse of the M-Series lineup. At 1,035 CFM with four-speed control, it delivers enough power to handle professional-style cooking equipment, high-BTU gas burners, and outdoor grills while giving the cook precise speed adjustment for lighter tasks. At just 6.6 Sones at high speed, the M1200 keeps noise levels manageable even in open-concept kitchens and outdoor entertaining environments where conversation matters.
Industrial-grade stainless steel baffle filters are the M-Series filtration system. Unlike mesh filters that clog quickly and require frequent replacement, stainless steel baffles redirect airflow to separate grease from the air stream, channeling it away from the ductwork. The baffles are removable and dishwasher-safe — pull them out, run them through a standard dishwasher cycle, and reinstall. No solvents, no hand-scrubbing, no special tools.
The entire unit is constructed from heavy-gauge 304-grade stainless steel with a clean linear design that complements any professional-style kitchen. The M1200 blower includes the VP566 transition adapter, connecting directly to 10-inch round ducting for straightforward installation. The hood is rated for outdoor use on covered patios when installed with a GFCI-protected circuit, with a recommended mounting height of 30 inches above the cooking surface.
5 Reasons to Choose Vent-A-Hood Over Cheaper Alternatives
01
Extended 30-Inch Capture Depth
Three inches deeper than standard 27-inch hoods, reaching further over the front burners where smoke and grease escape most readily during high-heat cooking.
02
1,035 CFM of Real Power
The M1200 blower delivers serious airflow for high-heat cooking, professional-style ranges, and outdoor grills — power that budget hoods simply cannot match.
03
Professional Baffle Filtration
Industrial-grade stainless steel baffles separate grease from the air stream and protect your ductwork — the same filtration technology used in commercial restaurant kitchens.
04
Dishwasher-Safe Maintenance
Stainless steel baffle filters snap out and go straight into the dishwasher — no hand-scrubbing mesh screens, no solvents, no special tools required.
05
90 Years of Ventilation Expertise
Vent-A-Hood has done one thing since 1933 — build range hoods. That single-category focus produces a level of engineering no full-line appliance brand can match.
Technical Documentation & Warranty
Download Installation Instructions | Download Owner's Manual | Download Vent-A-Hood Specs
|
1-Year Limited Warranty Vent-A-Hood warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase. Labor is not included in the warranty coverage. Please refer to the manufacturer's manual for complete warranty details regarding light bulbs and freight damage exclusions. |
Specs & Dimensions
Vent-A-Hood 42-Inch M-Series Range Hood (PRH18-M42) |
|
|---|---|
| General Configuration | |
| Manufacturer | Vent-A-Hood |
| Class | M-Series |
| Collection Name | Vent-A-Hood Vent Hoods |
| Hood Style | Canopy |
| Mounting Type | Wall Mount |
| Venting Type | Ducted |
| Approved For Outdoor Use | Yes (Covered Patio, GFCI Required) |
| Made in the USA | Yes |
| Blower & Performance | |
| Blower Type | Internal (M1200) |
| CFM (Cubic Feet/Min) | 1,035 CFM |
| Sound Level | 6.6 Sones (At High Speed) |
| Fan Speed Settings | 4 Speeds |
| Technology | M-Series Blower Motor with Baffle Filtration |
| Transition Included | Yes (VP566 Transition) |
| Duct Connection Size | 10" Round |
| Physical Dimensions | |
| Overall Width | 42 Inches |
| Overall Depth | 30 Inches |
| Overall Height | 18 Inches |
| Rec. Mounting Height | 30" Above Cooking Surface |
| Materials & Lighting | |
| Exterior Material | 304-Grade Stainless Steel |
| Primary Color | Stainless Steel |
| Filter Type | Industrial-Grade Stainless Steel Baffles |
| Lighting | 3 GU10 LED Bulbs |
| Lighting Controls | Variable 2-Level Dimming |
| Installation & Electrical | |
| Voltage | 115 Volts |
| Amperage | 10.0 Amps |
| Frequency | 60 Hz |
| Commercial Grade | No |
Vent-A-Hood 42-Inch M-Series 1035 CFM 304 Stainless Steel Baffle Style Wall Mount Range Hood
|
Since 1933, Vent-A-Hood has been the gold standard in residential ventilation, trusted by homeowners who refuse to compromise on air quality or craftsmanship. The M-Series pairs a clean linear design with the powerful M1200 blower motor, delivering 1,035 CFM of airflow through industrial-grade stainless steel baffle filters with four-speed precision control. At 42 inches wide with an extended 30-inch deep canopy, this hood provides the ideal combination of width and depth for 36-inch professional ranges, outdoor grills, and high-BTU cooktops — reaching three inches further over the front burners than a standard 27-inch canopy to capture more grease and smoke before it escapes. |
Performance & Power
✓ 1,035 CFM M1200 Blower
✓ 6.6 Sones at High Speed
✓ 4-Speed Variable Control
✓ VP566 Transition Included
Filtration & Safety
✓ Industrial-Grade Baffle Filters
✓ Dishwasher-Safe Baffles
✓ Grease & Smoke Containment
✓ LED Lighting with Dimming
American Craftsmanship
✓ 304-Grade Stainless Steel Body
✓ Extended 30-Inch Deep Canopy
✓ Outdoor Rated (Covered Patio)
✓ Proudly Made in the USA
Key Features & Owner Benefits:
- Powerful M1200 Blower Motor: The M1200 internal blower delivers a full 1,035 CFM of airflow at just 6.6 Sones, providing the power needed to clear heavy smoke, grease, and cooking odors from professional-style ranges, outdoor grills, and high-BTU cooktops.
- Extended 30-Inch Capture Depth: Three inches deeper than a standard 27-inch canopy, the 30-inch active depth provides a significantly larger capture zone directly over the cooking surface, containing more grease and smoke before it can escape into covered patio areas or open kitchens.
- Industrial-Grade Stainless Steel Baffle Filters: Professional-grade stainless steel baffles intercept airborne grease before it can enter the ductwork, protecting your ventilation system and reducing the risk of grease-related fire hazards over time. Baffles are removable and dishwasher-safe for easy maintenance.
- 4-Speed Blower Control: Four distinct fan speed settings give you precise airflow control — from a gentle background setting for light cooking to full 1,035 CFM power for high-heat grilling and searing.
- 304-Grade Stainless Steel Construction: Heavy-gauge 304-grade stainless steel resists corrosion, UV exposure, and temperature extremes, ensuring the hood maintains structural integrity and appearance in both indoor and outdoor environments.
- Outdoor Rated for Covered Patios: Built to withstand the elements in covered outdoor kitchens when installed with a GFCI-protected circuit — no separate outdoor model required.
- VP566 Transition & 10-Inch Round Ducting: The included VP566 transition adapter connects the M1200 blower directly to 10-inch round ducting for straightforward installation with no additional adapters or modifications required.
- Variable LED Lighting with 2-Level Dimming: Three GU10 LED bulbs illuminate the full cooking surface, providing bright task lighting for active cooking and a dimmed setting for low-light grilling sessions.
Extended-Depth M-Series Power for Professional Cooktops and Outdoor Grills
The Vent-A-Hood 42-Inch M-Series Hood with 30-inch depth is built for homeowners and outdoor cooks who need more front-to-back capture than a standard 27-inch canopy can provide. Whether installed over a 36-inch professional range, a built-in outdoor grill, or a high-BTU gas cooktop, the extended 30-inch depth reaches three inches further over the front burners where smoke and grease escape most readily during high-heat cooking. Since 1933, Vent-A-Hood has focused exclusively on ventilation engineering — a single-category expertise that has produced innovations no full-line appliance manufacturer has replicated.
The M1200 blower motor is the workhorse of the M-Series lineup. At 1,035 CFM with four-speed control, it delivers enough power to handle professional-style cooking equipment, high-BTU gas burners, and outdoor grills while giving the cook precise speed adjustment for lighter tasks. At just 6.6 Sones at high speed, the M1200 keeps noise levels manageable even in open-concept kitchens and outdoor entertaining environments where conversation matters.
Industrial-grade stainless steel baffle filters are the M-Series filtration system. Unlike mesh filters that clog quickly and require frequent replacement, stainless steel baffles redirect airflow to separate grease from the air stream, channeling it away from the ductwork. The baffles are removable and dishwasher-safe — pull them out, run them through a standard dishwasher cycle, and reinstall. No solvents, no hand-scrubbing, no special tools.
The entire unit is constructed from heavy-gauge 304-grade stainless steel with a clean linear design that complements any professional-style kitchen. The M1200 blower includes the VP566 transition adapter, connecting directly to 10-inch round ducting for straightforward installation. The hood is rated for outdoor use on covered patios when installed with a GFCI-protected circuit, with a recommended mounting height of 30 inches above the cooking surface.
5 Reasons to Choose Vent-A-Hood Over Cheaper Alternatives
01
Extended 30-Inch Capture Depth
Three inches deeper than standard 27-inch hoods, reaching further over the front burners where smoke and grease escape most readily during high-heat cooking.
02
1,035 CFM of Real Power
The M1200 blower delivers serious airflow for high-heat cooking, professional-style ranges, and outdoor grills — power that budget hoods simply cannot match.
03
Professional Baffle Filtration
Industrial-grade stainless steel baffles separate grease from the air stream and protect your ductwork — the same filtration technology used in commercial restaurant kitchens.
04
Dishwasher-Safe Maintenance
Stainless steel baffle filters snap out and go straight into the dishwasher — no hand-scrubbing mesh screens, no solvents, no special tools required.
05
90 Years of Ventilation Expertise
Vent-A-Hood has done one thing since 1933 — build range hoods. That single-category focus produces a level of engineering no full-line appliance brand can match.
Technical Documentation & Warranty
Download Installation Instructions | Download Owner's Manual | Download Vent-A-Hood Specs
|
1-Year Limited Warranty Vent-A-Hood warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase. Labor is not included in the warranty coverage. Please refer to the manufacturer's manual for complete warranty details regarding light bulbs and freight damage exclusions. |
Specs & Dimensions
Vent-A-Hood 42-Inch M-Series Range Hood (PRH18-M42) |
|
|---|---|
| General Configuration | |
| Manufacturer | Vent-A-Hood |
| Class | M-Series |
| Collection Name | Vent-A-Hood Vent Hoods |
| Hood Style | Canopy |
| Mounting Type | Wall Mount |
| Venting Type | Ducted |
| Approved For Outdoor Use | Yes (Covered Patio, GFCI Required) |
| Made in the USA | Yes |
| Blower & Performance | |
| Blower Type | Internal (M1200) |
| CFM (Cubic Feet/Min) | 1,035 CFM |
| Sound Level | 6.6 Sones (At High Speed) |
| Fan Speed Settings | 4 Speeds |
| Technology | M-Series Blower Motor with Baffle Filtration |
| Transition Included | Yes (VP566 Transition) |
| Duct Connection Size | 10" Round |
| Physical Dimensions | |
| Overall Width | 42 Inches |
| Overall Depth | 30 Inches |
| Overall Height | 18 Inches |
| Rec. Mounting Height | 30" Above Cooking Surface |
| Materials & Lighting | |
| Exterior Material | 304-Grade Stainless Steel |
| Primary Color | Stainless Steel |
| Filter Type | Industrial-Grade Stainless Steel Baffles |
| Lighting | 3 GU10 LED Bulbs |
| Lighting Controls | Variable 2-Level Dimming |
| Installation & Electrical | |
| Voltage | 115 Volts |
| Amperage | 10.0 Amps |
| Frequency | 60 Hz |
| Commercial Grade | No |
Original: $3,184.00
-65%$3,184.00
$1,114.40Description
Vent-A-Hood 42-Inch M-Series 1035 CFM 304 Stainless Steel Baffle Style Wall Mount Range Hood
|
Since 1933, Vent-A-Hood has been the gold standard in residential ventilation, trusted by homeowners who refuse to compromise on air quality or craftsmanship. The M-Series pairs a clean linear design with the powerful M1200 blower motor, delivering 1,035 CFM of airflow through industrial-grade stainless steel baffle filters with four-speed precision control. At 42 inches wide with an extended 30-inch deep canopy, this hood provides the ideal combination of width and depth for 36-inch professional ranges, outdoor grills, and high-BTU cooktops — reaching three inches further over the front burners than a standard 27-inch canopy to capture more grease and smoke before it escapes. |
Performance & Power
✓ 1,035 CFM M1200 Blower
✓ 6.6 Sones at High Speed
✓ 4-Speed Variable Control
✓ VP566 Transition Included
Filtration & Safety
✓ Industrial-Grade Baffle Filters
✓ Dishwasher-Safe Baffles
✓ Grease & Smoke Containment
✓ LED Lighting with Dimming
American Craftsmanship
✓ 304-Grade Stainless Steel Body
✓ Extended 30-Inch Deep Canopy
✓ Outdoor Rated (Covered Patio)
✓ Proudly Made in the USA
Key Features & Owner Benefits:
- Powerful M1200 Blower Motor: The M1200 internal blower delivers a full 1,035 CFM of airflow at just 6.6 Sones, providing the power needed to clear heavy smoke, grease, and cooking odors from professional-style ranges, outdoor grills, and high-BTU cooktops.
- Extended 30-Inch Capture Depth: Three inches deeper than a standard 27-inch canopy, the 30-inch active depth provides a significantly larger capture zone directly over the cooking surface, containing more grease and smoke before it can escape into covered patio areas or open kitchens.
- Industrial-Grade Stainless Steel Baffle Filters: Professional-grade stainless steel baffles intercept airborne grease before it can enter the ductwork, protecting your ventilation system and reducing the risk of grease-related fire hazards over time. Baffles are removable and dishwasher-safe for easy maintenance.
- 4-Speed Blower Control: Four distinct fan speed settings give you precise airflow control — from a gentle background setting for light cooking to full 1,035 CFM power for high-heat grilling and searing.
- 304-Grade Stainless Steel Construction: Heavy-gauge 304-grade stainless steel resists corrosion, UV exposure, and temperature extremes, ensuring the hood maintains structural integrity and appearance in both indoor and outdoor environments.
- Outdoor Rated for Covered Patios: Built to withstand the elements in covered outdoor kitchens when installed with a GFCI-protected circuit — no separate outdoor model required.
- VP566 Transition & 10-Inch Round Ducting: The included VP566 transition adapter connects the M1200 blower directly to 10-inch round ducting for straightforward installation with no additional adapters or modifications required.
- Variable LED Lighting with 2-Level Dimming: Three GU10 LED bulbs illuminate the full cooking surface, providing bright task lighting for active cooking and a dimmed setting for low-light grilling sessions.
Extended-Depth M-Series Power for Professional Cooktops and Outdoor Grills
The Vent-A-Hood 42-Inch M-Series Hood with 30-inch depth is built for homeowners and outdoor cooks who need more front-to-back capture than a standard 27-inch canopy can provide. Whether installed over a 36-inch professional range, a built-in outdoor grill, or a high-BTU gas cooktop, the extended 30-inch depth reaches three inches further over the front burners where smoke and grease escape most readily during high-heat cooking. Since 1933, Vent-A-Hood has focused exclusively on ventilation engineering — a single-category expertise that has produced innovations no full-line appliance manufacturer has replicated.
The M1200 blower motor is the workhorse of the M-Series lineup. At 1,035 CFM with four-speed control, it delivers enough power to handle professional-style cooking equipment, high-BTU gas burners, and outdoor grills while giving the cook precise speed adjustment for lighter tasks. At just 6.6 Sones at high speed, the M1200 keeps noise levels manageable even in open-concept kitchens and outdoor entertaining environments where conversation matters.
Industrial-grade stainless steel baffle filters are the M-Series filtration system. Unlike mesh filters that clog quickly and require frequent replacement, stainless steel baffles redirect airflow to separate grease from the air stream, channeling it away from the ductwork. The baffles are removable and dishwasher-safe — pull them out, run them through a standard dishwasher cycle, and reinstall. No solvents, no hand-scrubbing, no special tools.
The entire unit is constructed from heavy-gauge 304-grade stainless steel with a clean linear design that complements any professional-style kitchen. The M1200 blower includes the VP566 transition adapter, connecting directly to 10-inch round ducting for straightforward installation. The hood is rated for outdoor use on covered patios when installed with a GFCI-protected circuit, with a recommended mounting height of 30 inches above the cooking surface.
5 Reasons to Choose Vent-A-Hood Over Cheaper Alternatives
01
Extended 30-Inch Capture Depth
Three inches deeper than standard 27-inch hoods, reaching further over the front burners where smoke and grease escape most readily during high-heat cooking.
02
1,035 CFM of Real Power
The M1200 blower delivers serious airflow for high-heat cooking, professional-style ranges, and outdoor grills — power that budget hoods simply cannot match.
03
Professional Baffle Filtration
Industrial-grade stainless steel baffles separate grease from the air stream and protect your ductwork — the same filtration technology used in commercial restaurant kitchens.
04
Dishwasher-Safe Maintenance
Stainless steel baffle filters snap out and go straight into the dishwasher — no hand-scrubbing mesh screens, no solvents, no special tools required.
05
90 Years of Ventilation Expertise
Vent-A-Hood has done one thing since 1933 — build range hoods. That single-category focus produces a level of engineering no full-line appliance brand can match.
Technical Documentation & Warranty
Download Installation Instructions | Download Owner's Manual | Download Vent-A-Hood Specs
|
1-Year Limited Warranty Vent-A-Hood warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase. Labor is not included in the warranty coverage. Please refer to the manufacturer's manual for complete warranty details regarding light bulbs and freight damage exclusions. |
Specs & Dimensions
Vent-A-Hood 42-Inch M-Series Range Hood (PRH18-M42) |
|
|---|---|
| General Configuration | |
| Manufacturer | Vent-A-Hood |
| Class | M-Series |
| Collection Name | Vent-A-Hood Vent Hoods |
| Hood Style | Canopy |
| Mounting Type | Wall Mount |
| Venting Type | Ducted |
| Approved For Outdoor Use | Yes (Covered Patio, GFCI Required) |
| Made in the USA | Yes |
| Blower & Performance | |
| Blower Type | Internal (M1200) |
| CFM (Cubic Feet/Min) | 1,035 CFM |
| Sound Level | 6.6 Sones (At High Speed) |
| Fan Speed Settings | 4 Speeds |
| Technology | M-Series Blower Motor with Baffle Filtration |
| Transition Included | Yes (VP566 Transition) |
| Duct Connection Size | 10" Round |
| Physical Dimensions | |
| Overall Width | 42 Inches |
| Overall Depth | 30 Inches |
| Overall Height | 18 Inches |
| Rec. Mounting Height | 30" Above Cooking Surface |
| Materials & Lighting | |
| Exterior Material | 304-Grade Stainless Steel |
| Primary Color | Stainless Steel |
| Filter Type | Industrial-Grade Stainless Steel Baffles |
| Lighting | 3 GU10 LED Bulbs |
| Lighting Controls | Variable 2-Level Dimming |
| Installation & Electrical | |
| Voltage | 115 Volts |
| Amperage | 10.0 Amps |
| Frequency | 60 Hz |
| Commercial Grade | No |
