Vent-A-Hood 36-Inch 550 CFM Designer Series Island Range Hood - Stainless Steel - JCIH236/A1
Vent-A-Hood 36-Inch 550 CFM Designer Series Island Range Hood — Stainless Steel — JCIH236/A1
|
The Vent-A-Hood JCIH236/A1 is a 36-inch island-mounted range hood from the Premier Magic Lung® Designer Series — Vent-A-Hood's most artisanal and premium island collection, characterized by its two-part compound curve canopy with offset lip styling. This organic, doubly-curved form sets the JCIH apart from every other Vent-A-Hood island hood — it is a sculpted, European luxury aesthetic designed for kitchen spaces where the range hood is as much a design centerpiece as it is a ventilation appliance. Dual Magic Lung® blowers deliver 550 CFM of airflow — equivalent to 900 CFM from conventional systems — with 99% centrifugal grease capture and SensaSource® automatic heat detection. Available in the widest finish range of any Vent-A-Hood island series including stainless steel, painted, polished brass, polished copper, hammered copper, antiqued copper, and antiqued hammered copper. Island duct cover sold separately for 8', 9', and 10' ceiling heights. Recommended mounting height: 30 inches above the cooking surface. Made in the USA since 1933. |
Performance & Power
✓ 550 CFM — Dual Magic Lung® Blowers
✓ 2 × 275 CFM Independent Blowers
✓ 900 CFM Equivalent
✓ 99% Centrifugal Grease Capture
Smart Technology
✓ SensaSource® Auto Heat Detection
✓ 2-Speed Rocker Control
✓ Snap-Apart E-Z Clean Blower Housing
✓ Fire-Safe Centrifugal Pressure Barrier
Designer Finish Range
✓ Stainless Steel (This Listing)
✓ Polished Brass, Polished Copper
✓ Hammered, Antiqued & Antiqued Hammered Copper
✓ Custom Paint Colors Available
About the Compound Curve & Offset Lip Design — The Defining JCIH Aesthetic
The JCIH/A1 is built around Vent-A-Hood's most sculptural canopy form — the two-part compound curve with offset lip. This is not a linear profile or a simple rectangular box. It is an organically shaped, doubly-curved canopy inspired by European luxury kitchen aesthetics, where the range hood is treated as furniture-grade cabinetry and metalwork rather than an appliance.
Two-Part Compound Curve
Doubly-Curved Canopy — Sculpted Form
A compound curve is a surface that curves simultaneously in two planes — unlike a simple arc that curves in only one direction, a compound curve creates a three-dimensional sculptural form. The JCIH canopy uses this geometry across two distinct sections of the body, producing a flowing, organic silhouette that catches light differently from every angle and visually softens the kitchen ceiling above the island.
Offset Lip
Dynamic Bottom Edge — Not Parallel to the Ceiling
The offset lip is a deliberately asymmetric bottom edge — the front face of the hood terminates at a different plane than the rear, creating a visual dynamic and a sense of movement in a static form. From below, the offset lip creates a refined, jeweler's-edge finish to the canopy perimeter. From the side, it gives the hood its characteristic profile — a shape that is clearly designed rather than manufactured to a generic form.
Full Designer Finish Range
7 Finishes Including Copper, Brass & Custom Paint
The JCIH/A1 is available in Vent-A-Hood's widest finish range: stainless steel, polished brass, polished copper, hammered copper, antiqued copper, antiqued hammered copper, and painted (standard or custom colors). The compound curve profile is particularly striking in metal finishes — hammered and antiqued copper especially — where the surface texture and the curved form work together to create a truly handcrafted appearance.
What's Included — and What You'll Need to Complete the Installation
Included in the Box
Complete Island Canopy Package
Designer Series compound curve stainless steel canopy, dual Magic Lung® blower system, LED lighting, SensaSource® heat sensor, 2-speed rocker controls, and ceiling suspension hardware for island mounting.
Sold Separately — Required
Island Duct Cover (Not Included)
A matching Designer Series island duct cover is required to conceal the duct run to the ceiling. Available in standard sizes for 8', 9', and 10' ceiling heights, and in custom sizes for non-standard heights. Contact us to confirm the correct duct cover — and matching finish — before ordering.
Installer / Contractor Responsibility
Ductwork & Electrical — Not Included
Island installation requires ceiling-routed ductwork and a dedicated 115V circuit completed by a licensed contractor. Standard 6" round or 3¼" × 10" rectangular ductwork is typical at this CFM level. Outdoor covered patio installations require a GFCI-protected circuit.
Key Features & Owner Benefits:
- Two-Part Compound Curve with Offset Lip — Designer Series Canopy: Vent-A-Hood's most sculpted island canopy form — a doubly-curved, organic shape with an asymmetric offset lip. Designed for kitchen spaces where the range hood is a primary design element, not just a functional appliance. The compound curve catches and reflects light uniquely at every viewing angle; the offset lip creates a refined, jeweler's-edge finish to the canopy perimeter.
- Dual Magic Lung® Blower System — 550 CFM: 2 independent 275 CFM Magic Lung® centrifugal blowers deliver 550 CFM total — equivalent to 900 CFM from conventional hood systems. The multi-blower platform adds ventilation capacity with minimal sound increase. Centrifugal extraction captures 99% of cooking grease with no mesh or baffle filters. The snap-apart E-Z Clean blower housing opens by hand in seconds — dishwasher-safe, no tools required.
- Widest Finish Range in the Vent-A-Hood Island Lineup: Seven finishes available — stainless steel, painted (standard or custom colors), polished brass, polished copper, hammered copper, antiqued copper, and antiqued hammered copper. The compound curve profile is especially striking in metal finishes, where the surface and form combine to create a handcrafted appearance. Contact us to inquire about non-stainless finish options.
- SensaSource® Automatic Speed Control: Integrated heat sensor automatically returns the blower to high speed when rising heat is detected from the cooking surface, maintaining optimal grease capture and fire safety throughout the cook session without manual speed adjustments.
- Island Ceiling Mount — 36-Inch Coverage: Ceiling-suspended island mount — no wall attachment. The 36-inch canopy provides full airflow coverage over a 36-inch cooktop or island cooking surface below. Requires ceiling structural support and pre-routed ductwork before installation day.
- Outdoor Approved — GFCI Required: All Vent-A-Hood Magic Lung® products are UL listed for damp location use. The JCIH236/A1 is approved for covered outdoor patio installation when connected to a GFCI-protected circuit.
- Mounting Height — 30 Inches Above Cooking Surface: Vent-A-Hood recommends mounting the bottom of the canopy 30 inches above the cooking surface. Verify local clearance requirements before finalizing installation height.
Island Hood Installation — What to Know Before You Buy
01
Ceiling Structural Support
Island hoods hang from ceiling joists or blocking. Confirm ceiling structure can support the hood weight at the island location and install blocking before the hood arrives on site.
02
Ceiling Duct Penetration
A duct penetration through the ceiling must be cut, lined, and routed to the exterior or attic before the hood is installed. Pre-plan the full duct path, especially for large islands positioned far from exterior walls.
03
Dedicated Electrical Circuit
A 115V dedicated circuit must be roughed in at the ceiling above the island by a licensed electrician before installation.
04
Duct Cover & Finish Match — Order Separately
The Designer Series duct cover must match your hood finish. Standard sizes fit 8', 9', and 10' ceilings; custom sizes available. Contact us to specify the correct cover and finish before ordering.
05
Mounting Height
Bottom of canopy mounts 30 inches above the cooking surface. Confirm this works with your ceiling height and duct cover selection before ordering.
Magic Lung® Multi-Blower CFM Scaling
| Magic Lung® Performance by Blower Configuration | |
|---|---|
| Single Magic Lung® Blower | 275 CFM — Quietest Setting |
| Dual Magic Lung® Blowers | 550 CFM — Equivalent to 900 CFM Conventional |
| Triple Magic Lung® Blowers | 825 CFM — Available in Select Models |
| Quad Magic Lung® Blowers | 1,100 CFM — Equivalent to 1,800 CFM Conventional |
Technical Documentation & Warranty
📄 Download Installation Instructions (PDF)   |  📋 Download Spec Sheet (PDF)
|
5-Year Limited Warranty Vent-A-Hood warrants their Premier Magic Lung® Designer Series products to be free from defects in workmanship and materials for a period of five (5) years from the date of purchase. Labor not included. Please refer to the manufacturer's documentation for complete warranty details. |
Specs & Dimensions
Vent-A-Hood Designer Series Island Range Hood — JCIH236/A1 | |
|---|---|
| General Configuration | |
| Manufacturer | Vent-A-Hood |
| Model Number | JCIH236/A1 SS |
| Series | Premier Magic Lung® Designer Series Island |
| Canopy Design | Two-Part Compound Curve with Offset Lip |
| Hood Style | Island Mount — Ceiling Suspended |
| Mounting Type | Island Ceiling Mount (No Wall Attachment) |
| Recommended Mounting Height | 30 Inches Above Cooking Surface |
| Venting Type | Ducted — Top or Back Vent Options |
| Approved For Outdoor Use | Yes — Covered Patio, GFCI Circuit Required |
| Made in the USA | Yes — Since 1933 |
| Blower & Performance | |
| Blower System | Dual Magic Lung® Centrifugal Blowers |
| CFM (Total) | 550 CFM (2 × 275 CFM) |
| Equivalent CFM | 900 CFM Equivalent (vs. Conventional Systems) |
| Fan Speed Settings | 2 Speeds — Rocker Control |
| Grease Capture Rate | 99% — Centrifugal Extraction, No Filters |
| Technology | Patented Magic Lung® & SensaSource® Heat Detection |
| Physical Dimensions | |
| Overall Width | 36 Inches |
| Overall Depth | 27 Inches |
| Materials, Finish & Lighting | |
| Exterior Material | Stainless Steel (This Listing) |
| Available Finishes | Stainless Steel, Painted (Custom Colors), Polished Brass, Polished Copper, Hammered Copper, Antiqued Copper, Antiqued Hammered Copper |
| Lighting | LED — 4 Lights (One in Each Corner) with 2-Level Dimming |
| Installation & Electrical | |
| Voltage | 115 Volts |
| Duct Cover Included | No — Sold Separately (8', 9', 10' Standard or Custom Heights) |
| Recirculating Option | No — Ducted Only |
Vent-A-Hood 36-Inch 550 CFM Designer Series Island Range Hood — Stainless Steel — JCIH236/A1
|
The Vent-A-Hood JCIH236/A1 is a 36-inch island-mounted range hood from the Premier Magic Lung® Designer Series — Vent-A-Hood's most artisanal and premium island collection, characterized by its two-part compound curve canopy with offset lip styling. This organic, doubly-curved form sets the JCIH apart from every other Vent-A-Hood island hood — it is a sculpted, European luxury aesthetic designed for kitchen spaces where the range hood is as much a design centerpiece as it is a ventilation appliance. Dual Magic Lung® blowers deliver 550 CFM of airflow — equivalent to 900 CFM from conventional systems — with 99% centrifugal grease capture and SensaSource® automatic heat detection. Available in the widest finish range of any Vent-A-Hood island series including stainless steel, painted, polished brass, polished copper, hammered copper, antiqued copper, and antiqued hammered copper. Island duct cover sold separately for 8', 9', and 10' ceiling heights. Recommended mounting height: 30 inches above the cooking surface. Made in the USA since 1933. |
Performance & Power
✓ 550 CFM — Dual Magic Lung® Blowers
✓ 2 × 275 CFM Independent Blowers
✓ 900 CFM Equivalent
✓ 99% Centrifugal Grease Capture
Smart Technology
✓ SensaSource® Auto Heat Detection
✓ 2-Speed Rocker Control
✓ Snap-Apart E-Z Clean Blower Housing
✓ Fire-Safe Centrifugal Pressure Barrier
Designer Finish Range
✓ Stainless Steel (This Listing)
✓ Polished Brass, Polished Copper
✓ Hammered, Antiqued & Antiqued Hammered Copper
✓ Custom Paint Colors Available
About the Compound Curve & Offset Lip Design — The Defining JCIH Aesthetic
The JCIH/A1 is built around Vent-A-Hood's most sculptural canopy form — the two-part compound curve with offset lip. This is not a linear profile or a simple rectangular box. It is an organically shaped, doubly-curved canopy inspired by European luxury kitchen aesthetics, where the range hood is treated as furniture-grade cabinetry and metalwork rather than an appliance.
Two-Part Compound Curve
Doubly-Curved Canopy — Sculpted Form
A compound curve is a surface that curves simultaneously in two planes — unlike a simple arc that curves in only one direction, a compound curve creates a three-dimensional sculptural form. The JCIH canopy uses this geometry across two distinct sections of the body, producing a flowing, organic silhouette that catches light differently from every angle and visually softens the kitchen ceiling above the island.
Offset Lip
Dynamic Bottom Edge — Not Parallel to the Ceiling
The offset lip is a deliberately asymmetric bottom edge — the front face of the hood terminates at a different plane than the rear, creating a visual dynamic and a sense of movement in a static form. From below, the offset lip creates a refined, jeweler's-edge finish to the canopy perimeter. From the side, it gives the hood its characteristic profile — a shape that is clearly designed rather than manufactured to a generic form.
Full Designer Finish Range
7 Finishes Including Copper, Brass & Custom Paint
The JCIH/A1 is available in Vent-A-Hood's widest finish range: stainless steel, polished brass, polished copper, hammered copper, antiqued copper, antiqued hammered copper, and painted (standard or custom colors). The compound curve profile is particularly striking in metal finishes — hammered and antiqued copper especially — where the surface texture and the curved form work together to create a truly handcrafted appearance.
What's Included — and What You'll Need to Complete the Installation
Included in the Box
Complete Island Canopy Package
Designer Series compound curve stainless steel canopy, dual Magic Lung® blower system, LED lighting, SensaSource® heat sensor, 2-speed rocker controls, and ceiling suspension hardware for island mounting.
Sold Separately — Required
Island Duct Cover (Not Included)
A matching Designer Series island duct cover is required to conceal the duct run to the ceiling. Available in standard sizes for 8', 9', and 10' ceiling heights, and in custom sizes for non-standard heights. Contact us to confirm the correct duct cover — and matching finish — before ordering.
Installer / Contractor Responsibility
Ductwork & Electrical — Not Included
Island installation requires ceiling-routed ductwork and a dedicated 115V circuit completed by a licensed contractor. Standard 6" round or 3¼" × 10" rectangular ductwork is typical at this CFM level. Outdoor covered patio installations require a GFCI-protected circuit.
Key Features & Owner Benefits:
- Two-Part Compound Curve with Offset Lip — Designer Series Canopy: Vent-A-Hood's most sculpted island canopy form — a doubly-curved, organic shape with an asymmetric offset lip. Designed for kitchen spaces where the range hood is a primary design element, not just a functional appliance. The compound curve catches and reflects light uniquely at every viewing angle; the offset lip creates a refined, jeweler's-edge finish to the canopy perimeter.
- Dual Magic Lung® Blower System — 550 CFM: 2 independent 275 CFM Magic Lung® centrifugal blowers deliver 550 CFM total — equivalent to 900 CFM from conventional hood systems. The multi-blower platform adds ventilation capacity with minimal sound increase. Centrifugal extraction captures 99% of cooking grease with no mesh or baffle filters. The snap-apart E-Z Clean blower housing opens by hand in seconds — dishwasher-safe, no tools required.
- Widest Finish Range in the Vent-A-Hood Island Lineup: Seven finishes available — stainless steel, painted (standard or custom colors), polished brass, polished copper, hammered copper, antiqued copper, and antiqued hammered copper. The compound curve profile is especially striking in metal finishes, where the surface and form combine to create a handcrafted appearance. Contact us to inquire about non-stainless finish options.
- SensaSource® Automatic Speed Control: Integrated heat sensor automatically returns the blower to high speed when rising heat is detected from the cooking surface, maintaining optimal grease capture and fire safety throughout the cook session without manual speed adjustments.
- Island Ceiling Mount — 36-Inch Coverage: Ceiling-suspended island mount — no wall attachment. The 36-inch canopy provides full airflow coverage over a 36-inch cooktop or island cooking surface below. Requires ceiling structural support and pre-routed ductwork before installation day.
- Outdoor Approved — GFCI Required: All Vent-A-Hood Magic Lung® products are UL listed for damp location use. The JCIH236/A1 is approved for covered outdoor patio installation when connected to a GFCI-protected circuit.
- Mounting Height — 30 Inches Above Cooking Surface: Vent-A-Hood recommends mounting the bottom of the canopy 30 inches above the cooking surface. Verify local clearance requirements before finalizing installation height.
Island Hood Installation — What to Know Before You Buy
01
Ceiling Structural Support
Island hoods hang from ceiling joists or blocking. Confirm ceiling structure can support the hood weight at the island location and install blocking before the hood arrives on site.
02
Ceiling Duct Penetration
A duct penetration through the ceiling must be cut, lined, and routed to the exterior or attic before the hood is installed. Pre-plan the full duct path, especially for large islands positioned far from exterior walls.
03
Dedicated Electrical Circuit
A 115V dedicated circuit must be roughed in at the ceiling above the island by a licensed electrician before installation.
04
Duct Cover & Finish Match — Order Separately
The Designer Series duct cover must match your hood finish. Standard sizes fit 8', 9', and 10' ceilings; custom sizes available. Contact us to specify the correct cover and finish before ordering.
05
Mounting Height
Bottom of canopy mounts 30 inches above the cooking surface. Confirm this works with your ceiling height and duct cover selection before ordering.
Magic Lung® Multi-Blower CFM Scaling
| Magic Lung® Performance by Blower Configuration | |
|---|---|
| Single Magic Lung® Blower | 275 CFM — Quietest Setting |
| Dual Magic Lung® Blowers | 550 CFM — Equivalent to 900 CFM Conventional |
| Triple Magic Lung® Blowers | 825 CFM — Available in Select Models |
| Quad Magic Lung® Blowers | 1,100 CFM — Equivalent to 1,800 CFM Conventional |
Technical Documentation & Warranty
📄 Download Installation Instructions (PDF)   |  📋 Download Spec Sheet (PDF)
|
5-Year Limited Warranty Vent-A-Hood warrants their Premier Magic Lung® Designer Series products to be free from defects in workmanship and materials for a period of five (5) years from the date of purchase. Labor not included. Please refer to the manufacturer's documentation for complete warranty details. |
Specs & Dimensions
Vent-A-Hood Designer Series Island Range Hood — JCIH236/A1 | |
|---|---|
| General Configuration | |
| Manufacturer | Vent-A-Hood |
| Model Number | JCIH236/A1 SS |
| Series | Premier Magic Lung® Designer Series Island |
| Canopy Design | Two-Part Compound Curve with Offset Lip |
| Hood Style | Island Mount — Ceiling Suspended |
| Mounting Type | Island Ceiling Mount (No Wall Attachment) |
| Recommended Mounting Height | 30 Inches Above Cooking Surface |
| Venting Type | Ducted — Top or Back Vent Options |
| Approved For Outdoor Use | Yes — Covered Patio, GFCI Circuit Required |
| Made in the USA | Yes — Since 1933 |
| Blower & Performance | |
| Blower System | Dual Magic Lung® Centrifugal Blowers |
| CFM (Total) | 550 CFM (2 × 275 CFM) |
| Equivalent CFM | 900 CFM Equivalent (vs. Conventional Systems) |
| Fan Speed Settings | 2 Speeds — Rocker Control |
| Grease Capture Rate | 99% — Centrifugal Extraction, No Filters |
| Technology | Patented Magic Lung® & SensaSource® Heat Detection |
| Physical Dimensions | |
| Overall Width | 36 Inches |
| Overall Depth | 27 Inches |
| Materials, Finish & Lighting | |
| Exterior Material | Stainless Steel (This Listing) |
| Available Finishes | Stainless Steel, Painted (Custom Colors), Polished Brass, Polished Copper, Hammered Copper, Antiqued Copper, Antiqued Hammered Copper |
| Lighting | LED — 4 Lights (One in Each Corner) with 2-Level Dimming |
| Installation & Electrical | |
| Voltage | 115 Volts |
| Duct Cover Included | No — Sold Separately (8', 9', 10' Standard or Custom Heights) |
| Recirculating Option | No — Ducted Only |
Original: $5,665.00
-65%$5,665.00
$1,982.75Description
Vent-A-Hood 36-Inch 550 CFM Designer Series Island Range Hood — Stainless Steel — JCIH236/A1
|
The Vent-A-Hood JCIH236/A1 is a 36-inch island-mounted range hood from the Premier Magic Lung® Designer Series — Vent-A-Hood's most artisanal and premium island collection, characterized by its two-part compound curve canopy with offset lip styling. This organic, doubly-curved form sets the JCIH apart from every other Vent-A-Hood island hood — it is a sculpted, European luxury aesthetic designed for kitchen spaces where the range hood is as much a design centerpiece as it is a ventilation appliance. Dual Magic Lung® blowers deliver 550 CFM of airflow — equivalent to 900 CFM from conventional systems — with 99% centrifugal grease capture and SensaSource® automatic heat detection. Available in the widest finish range of any Vent-A-Hood island series including stainless steel, painted, polished brass, polished copper, hammered copper, antiqued copper, and antiqued hammered copper. Island duct cover sold separately for 8', 9', and 10' ceiling heights. Recommended mounting height: 30 inches above the cooking surface. Made in the USA since 1933. |
Performance & Power
✓ 550 CFM — Dual Magic Lung® Blowers
✓ 2 × 275 CFM Independent Blowers
✓ 900 CFM Equivalent
✓ 99% Centrifugal Grease Capture
Smart Technology
✓ SensaSource® Auto Heat Detection
✓ 2-Speed Rocker Control
✓ Snap-Apart E-Z Clean Blower Housing
✓ Fire-Safe Centrifugal Pressure Barrier
Designer Finish Range
✓ Stainless Steel (This Listing)
✓ Polished Brass, Polished Copper
✓ Hammered, Antiqued & Antiqued Hammered Copper
✓ Custom Paint Colors Available
About the Compound Curve & Offset Lip Design — The Defining JCIH Aesthetic
The JCIH/A1 is built around Vent-A-Hood's most sculptural canopy form — the two-part compound curve with offset lip. This is not a linear profile or a simple rectangular box. It is an organically shaped, doubly-curved canopy inspired by European luxury kitchen aesthetics, where the range hood is treated as furniture-grade cabinetry and metalwork rather than an appliance.
Two-Part Compound Curve
Doubly-Curved Canopy — Sculpted Form
A compound curve is a surface that curves simultaneously in two planes — unlike a simple arc that curves in only one direction, a compound curve creates a three-dimensional sculptural form. The JCIH canopy uses this geometry across two distinct sections of the body, producing a flowing, organic silhouette that catches light differently from every angle and visually softens the kitchen ceiling above the island.
Offset Lip
Dynamic Bottom Edge — Not Parallel to the Ceiling
The offset lip is a deliberately asymmetric bottom edge — the front face of the hood terminates at a different plane than the rear, creating a visual dynamic and a sense of movement in a static form. From below, the offset lip creates a refined, jeweler's-edge finish to the canopy perimeter. From the side, it gives the hood its characteristic profile — a shape that is clearly designed rather than manufactured to a generic form.
Full Designer Finish Range
7 Finishes Including Copper, Brass & Custom Paint
The JCIH/A1 is available in Vent-A-Hood's widest finish range: stainless steel, polished brass, polished copper, hammered copper, antiqued copper, antiqued hammered copper, and painted (standard or custom colors). The compound curve profile is particularly striking in metal finishes — hammered and antiqued copper especially — where the surface texture and the curved form work together to create a truly handcrafted appearance.
What's Included — and What You'll Need to Complete the Installation
Included in the Box
Complete Island Canopy Package
Designer Series compound curve stainless steel canopy, dual Magic Lung® blower system, LED lighting, SensaSource® heat sensor, 2-speed rocker controls, and ceiling suspension hardware for island mounting.
Sold Separately — Required
Island Duct Cover (Not Included)
A matching Designer Series island duct cover is required to conceal the duct run to the ceiling. Available in standard sizes for 8', 9', and 10' ceiling heights, and in custom sizes for non-standard heights. Contact us to confirm the correct duct cover — and matching finish — before ordering.
Installer / Contractor Responsibility
Ductwork & Electrical — Not Included
Island installation requires ceiling-routed ductwork and a dedicated 115V circuit completed by a licensed contractor. Standard 6" round or 3¼" × 10" rectangular ductwork is typical at this CFM level. Outdoor covered patio installations require a GFCI-protected circuit.
Key Features & Owner Benefits:
- Two-Part Compound Curve with Offset Lip — Designer Series Canopy: Vent-A-Hood's most sculpted island canopy form — a doubly-curved, organic shape with an asymmetric offset lip. Designed for kitchen spaces where the range hood is a primary design element, not just a functional appliance. The compound curve catches and reflects light uniquely at every viewing angle; the offset lip creates a refined, jeweler's-edge finish to the canopy perimeter.
- Dual Magic Lung® Blower System — 550 CFM: 2 independent 275 CFM Magic Lung® centrifugal blowers deliver 550 CFM total — equivalent to 900 CFM from conventional hood systems. The multi-blower platform adds ventilation capacity with minimal sound increase. Centrifugal extraction captures 99% of cooking grease with no mesh or baffle filters. The snap-apart E-Z Clean blower housing opens by hand in seconds — dishwasher-safe, no tools required.
- Widest Finish Range in the Vent-A-Hood Island Lineup: Seven finishes available — stainless steel, painted (standard or custom colors), polished brass, polished copper, hammered copper, antiqued copper, and antiqued hammered copper. The compound curve profile is especially striking in metal finishes, where the surface and form combine to create a handcrafted appearance. Contact us to inquire about non-stainless finish options.
- SensaSource® Automatic Speed Control: Integrated heat sensor automatically returns the blower to high speed when rising heat is detected from the cooking surface, maintaining optimal grease capture and fire safety throughout the cook session without manual speed adjustments.
- Island Ceiling Mount — 36-Inch Coverage: Ceiling-suspended island mount — no wall attachment. The 36-inch canopy provides full airflow coverage over a 36-inch cooktop or island cooking surface below. Requires ceiling structural support and pre-routed ductwork before installation day.
- Outdoor Approved — GFCI Required: All Vent-A-Hood Magic Lung® products are UL listed for damp location use. The JCIH236/A1 is approved for covered outdoor patio installation when connected to a GFCI-protected circuit.
- Mounting Height — 30 Inches Above Cooking Surface: Vent-A-Hood recommends mounting the bottom of the canopy 30 inches above the cooking surface. Verify local clearance requirements before finalizing installation height.
Island Hood Installation — What to Know Before You Buy
01
Ceiling Structural Support
Island hoods hang from ceiling joists or blocking. Confirm ceiling structure can support the hood weight at the island location and install blocking before the hood arrives on site.
02
Ceiling Duct Penetration
A duct penetration through the ceiling must be cut, lined, and routed to the exterior or attic before the hood is installed. Pre-plan the full duct path, especially for large islands positioned far from exterior walls.
03
Dedicated Electrical Circuit
A 115V dedicated circuit must be roughed in at the ceiling above the island by a licensed electrician before installation.
04
Duct Cover & Finish Match — Order Separately
The Designer Series duct cover must match your hood finish. Standard sizes fit 8', 9', and 10' ceilings; custom sizes available. Contact us to specify the correct cover and finish before ordering.
05
Mounting Height
Bottom of canopy mounts 30 inches above the cooking surface. Confirm this works with your ceiling height and duct cover selection before ordering.
Magic Lung® Multi-Blower CFM Scaling
| Magic Lung® Performance by Blower Configuration | |
|---|---|
| Single Magic Lung® Blower | 275 CFM — Quietest Setting |
| Dual Magic Lung® Blowers | 550 CFM — Equivalent to 900 CFM Conventional |
| Triple Magic Lung® Blowers | 825 CFM — Available in Select Models |
| Quad Magic Lung® Blowers | 1,100 CFM — Equivalent to 1,800 CFM Conventional |
Technical Documentation & Warranty
📄 Download Installation Instructions (PDF)   |  📋 Download Spec Sheet (PDF)
|
5-Year Limited Warranty Vent-A-Hood warrants their Premier Magic Lung® Designer Series products to be free from defects in workmanship and materials for a period of five (5) years from the date of purchase. Labor not included. Please refer to the manufacturer's documentation for complete warranty details. |
Specs & Dimensions
Vent-A-Hood Designer Series Island Range Hood — JCIH236/A1 | |
|---|---|
| General Configuration | |
| Manufacturer | Vent-A-Hood |
| Model Number | JCIH236/A1 SS |
| Series | Premier Magic Lung® Designer Series Island |
| Canopy Design | Two-Part Compound Curve with Offset Lip |
| Hood Style | Island Mount — Ceiling Suspended |
| Mounting Type | Island Ceiling Mount (No Wall Attachment) |
| Recommended Mounting Height | 30 Inches Above Cooking Surface |
| Venting Type | Ducted — Top or Back Vent Options |
| Approved For Outdoor Use | Yes — Covered Patio, GFCI Circuit Required |
| Made in the USA | Yes — Since 1933 |
| Blower & Performance | |
| Blower System | Dual Magic Lung® Centrifugal Blowers |
| CFM (Total) | 550 CFM (2 × 275 CFM) |
| Equivalent CFM | 900 CFM Equivalent (vs. Conventional Systems) |
| Fan Speed Settings | 2 Speeds — Rocker Control |
| Grease Capture Rate | 99% — Centrifugal Extraction, No Filters |
| Technology | Patented Magic Lung® & SensaSource® Heat Detection |
| Physical Dimensions | |
| Overall Width | 36 Inches |
| Overall Depth | 27 Inches |
| Materials, Finish & Lighting | |
| Exterior Material | Stainless Steel (This Listing) |
| Available Finishes | Stainless Steel, Painted (Custom Colors), Polished Brass, Polished Copper, Hammered Copper, Antiqued Copper, Antiqued Hammered Copper |
| Lighting | LED — 4 Lights (One in Each Corner) with 2-Level Dimming |
| Installation & Electrical | |
| Voltage | 115 Volts |
| Duct Cover Included | No — Sold Separately (8', 9', 10' Standard or Custom Heights) |
| Recirculating Option | No — Ducted Only |
